Rancang Bangun Pendeteksi Tempat Sampah Organik Dan Anorganik Dengan Menggunakan Sensor Proximity
Keywords:
Capacitive Proximity Sensor, Arduino microcontroller, , HC-SR04 ultrasonic sensorAbstract
Garbage is a serious threat to humans because careless disposal of waste can cause environmental pollution. Poor waste management exacerbates this problem. To overcome this, a smart trash can based on an Arduino microcontroller is needed. This trash can uses an HC-SR04 Ultrasonic Sensor to detect the distance and volume of trash, as well as a Servo to control the trash can lid. Capacitive Proximity Sensors are used to sort organic and inorganic waste. The buzzer and LED function as alarms and indicators when the trash can is full. The SIM800L V.2 GSM module is used to send SMS to officers when the trash can is full. This smart trash can has two compartments for organic and inorganic waste, as well as one entrance for disposing of waste. The trash can lid will open and close automatically when it detects human presence at a distance of 40 cm. If the waste is detected as organic, the servo will move to the left, whereas if it is not detected by the capacitive sensor, the servo will move to the right for inorganic waste. When the trash can is full, the buzzer will sound, the LED will light up, and an SMS will be sent to the officer. With this technology, waste management becomes more efficient and the environment becomes cleaner and healthier.
References
Angga Fernanda Agustya, Akhmad Fakhruzi, (2020), “Rancang Bangun Alat Otomatis Pemilah Sampah Logam, Organik Dan Anorganik Menggunakan Sensor Proximity Induksi Dan Sensor Proximity Kapasitif”. Institut Teknologi Adhi Tama Surabaya.
Dedi ismail, (2023), “Rancang Bangun alat Tester Harness Connector Berbasis Mikrokontroler Untuk Inspeksi Kabel Dan Konektor”. Politeknik Baja Tegal
Dedi Setiawan, Trinanda Syahputra, Muhammad Iqbal, (2014), “Rancang Bangun Alat Pembuka dan Penutup Tong Sampah Otomatis Berbasis Mikrokontroler”, Vol. 1 No. 1
2014.
Dhika Aditya Rumansyah, Safrina Amini, Sri Mulyati, Purwanto, “Rancangan Alat Pemilah Sampah Otomatis Menggunakan Sensor Ultrasonik HC-SR04, Microcontroller Nodemcu, dan Sensor Proximity”.
Ganda Raya, 2018, “Rancang Bangun Tempat Sampah Pintar Menggunakan Sensor Jarak Berbasis Mikrokontroler Atmega 328”, Universitas Sumatra Utara, Medan.
Ghufron, A. 2011. Pendekatan Penelitian dan Pengembangan (R&D) di BidangPendidikan dan Pembelajaran. Handout. Fakultas Ilmu Pendidikan UNY.
Memen Akbar, Sri Devi Anjasmara, Kartina Dyah K Wardhani, 2021, “Rancang Bangun Alat Pendeteksi Sampah Organik dan Anorganik Menggunakan Sensor Proximity dan NodeMCU ESP8266”, Vol. 7,
No. 2, November 2021.
M. M. A. Mabrur, "Rancang Bangun Sistem Smart Trash Can Berbasis Android," UIN Alauddin, Makasar, 2016.
M. Ismail, R. K. Abdullah and S. Abdussamad, "Tempat Sampah Pintar Berbasis Internet of Things (IoT) Dengan Sistem Teknologi Informasi," JAMBURA, vol. 3, no. 1, pp. 7-
12, Januari 2021.
Muhammad Arif Maulana Nabil, 2018, “Kotak Sampah Pintar Menggunakan Sensor
Ultrasonik Berbasis Mikrokontroler Arduino Uno”. Universitas Islam Indonesia
Muhammad Yunus, “Rancang Bangun Pototipe Tempat Sampah Pintar Pemilah Sampah Organik Dan Anorganik Menggunakan Arduino”,
