Rancang Bangun Over Current Relay Sebagai Sistem Proteksi Fast Charging Panel Surya
Keywords:
Over current relay, short circuit, fast chargingAbstract
Over current relay is equipment that is very important for protecting the electrical system from disturbances that can cause overcurrent such as short circuits in the installation network and the use of electrical energy that exceeds the customer's usage capacity so that it can cause damage to equipment such as damage to transformers, damage to conductors and can expand the area. goes out. Data collection, preparation of over current relay devices as a fast charging protection system for solar panels. The purpose of making an over current relay is as an over current protection tool in order to minimize damage to components and other electronic devices. This research method combines experimental and descriptive approaches. A descriptive approach was used to review literature related to relevant tools in this research. Meanwhile, the experimental method is designing an over current relay as a fast charging protection system for solar panels. Over current relays can work with a fast response, are flexible, are not easily damaged, are accurate in overcoming disturbances and are designed with electronic circuits. This prototype form of over current relay protection is designed using the LM358GN IC as a controller. The current setting on the Over current relay is 2.1 amperes and is equipped with a green LED indicator light which indicates normal current and a red LED indicator light which indicates excessive current.
References
Asfan, M. J., & Arsana, I. M. (2021). Rancang Bangun Baterai Charger Otomotif. Jurnal Rekayasa Mesin, 06(01), 105–109.
Fauziah, I., Wijayanto, K., & Supriyanto, S. (2021). Rancang Bangun Over Current Relay Pada Simulator Gardu Induk 70/20 kV Menggunakan PLC dan HMI. Prosiding Industrial Research Workshop and National Seminar Bandung, 296–301.
Fidaul Ahsan, M., Dodi Pratama, R., Sigit Hidayat, R., Prayoga, D., & Oktavina Radianto, D. (2023). Rancangan Fast Charging untuk Kendaraan Listrik dengan Menggunakan Algoritma Kontrol Tegangan pada Baterai. Jurnal Syntax Fusion, 3(07), 708–714.
Gunawan, L. A., Agung, A. I., Widyartono, M., & Haryudo, S. I. (2021). Rancang bangun Pembangkit Listrik Tenaga Surya portable. Jurnal Teknik Elektro, 10(1), 65–71.
Hakimah, Y. (2019). Analisis kebutuhan listrik dan penambahan pembangkit listrik. Journal of Chemical Information and Modeling, 53(9), 1689–1699.
Jaenul, A., Manfaluthy, M., Pramodja, Y., & Anjara, F. (2022). Pembuatan Sumber Listrik Cadangan Menggunakan Panel Surya Berbasis Internet of Things (IoT) dengan Beban Lampu dan Peralatan Listrik. Formosa Journal of Science and Technology, 1(3),143–156.
Maulana E, & Purnama, R. A. (2017). Pemanfaatan Layanan SMS Telepon Seluler Berbasis Mikrokontroler Atmega328p Sebagai Sistem Kontrol Lampu Rumah. Jurnal Teknik Komputer Amik Bsi 93 Issn. 2442-
2436, 3(1), 93–99.
Mendoza, S. D., Nieweglowska, E. S., Govindarajan, S., Leon, L. M., Berry,
J. D., Tiwari, A., Chaikeeratisak, V., Pogliano, J., Agard, D. A., Bondy- Denomy, J., Chatterjee, P., Jakimo, N., Lee, J., Amrani, N., Rodríguez, T., Koseki, S. R. T., Tysinger, E., Qing, R., Hao, S., … Wang, H. (2020). No 主
観的健康感を中心とした在宅高齢者における 健康関連指標に関する共分散構造分析 Title. Nature Microbiology, 3(1), 641.
Paminto, H. D., & Kiswantono, A. (2021). Volume 3 Issue 1 Aisyah Journal of Informatics and Electrical Engineering RANCANG SIMULASI SISTEM OVER CURRENT RELAY PADA JARINGAN DISTRIBUSI 20KV MENGGGUNAKAN ETAP. 3(1), 45–
49.
Saifuddin Ahmad. (2020). Literasi Jurnal Kajian Keislaman Multi-Perpektif. Jurnal Kajian Keislaman Multi Perspektif, 1(1), 1–22.
Wahyuddin, W., & Syafinas Ayu, A. N. (2023). Aplikasi Pembaca Nilai Resistor Berbasis Android. Jurnal Sintaks Logika, 3(1), 17–22.
Zulkarnaini, Z. (2019). Analisa Proteksi Arus Lebih Pada Generator PLTU Teluk Sirih. Jurnal Teknik Elektro ITP, 8(1), 28–34.
