RANCANG BANGUN SISTEM PENGEREMAN JENIS CAKRAM PADA KENDARAAN MOBIL LISTRIK
Keywords:
Brake System, Disc Brake, Autodesk Fusion Software FusionAbstract
The disc brake system is a crucial component in vehicles for slowing down and stopping their motion. Although disc brake systems have been around for a long time, there are still many challenges to address and innovate, such as comfort levels, responsiveness, safety, user control limitations, and difficulties in overcoming obstacles higher than the road surface. As a solution to these issues, this development focuses on innovating the steering and suspension components to make them more relevant to the planning of future electric vehicles. This includes several new features such as the design of the brake pedal, the fabrication of a brake pedal directly connected to the master cylinder to maximize braking performance, and the fabrication of the brake pedal mount. The methodology used in this final project includes data collection, design of the disc brake system using Autodesk Fusion software, fabrication, assembly of all components that have been fabricated, painting, and final assembly leading to conclusions. Based on the planning, the measurement of the disc brake system created in this final project includes the final processes of painting and assembly.
References
Din, R., Mufarida, N. A., Ridlo, N. Z., & Abidin, A. (2024). ANALISA SISTEM PENGEREMAN MOBIL LISTRIK 2 KW. 3(1), 438–443.
Egziabher, T. B. G., & Edwards, S. (2021). Mobil Listrik. Africa’s Potential for the Ecological Intensification of Agriculture, 53(9), 1689–1699.
Eko Ari Wibowo, Widyastuti, Muhammad Nur Wahyu Hidayah, & Ida Betanursanti. (2023). Desain dan Analisa Perhitungan Rem Cakram Pada Mobil Sport Utility Vehicle (SUV). Accurate: Journal of Mechanical Engineering and Science, 4(1), 20–23. https://doi.org/10.35970/accurate.v4i1.2018
Famoesa, M. A. P., S, P. I., & Pranatal, E. (2020). Pengaruh variasi sudut kampuh v pada sambungan las fcaw dari material baja ss 400. E-Journal ITATS, 2(1), 85–93.
Huka, G. I., Loppies, L. S., Matheus, J., Wilujeng, A. D., & Hamid, A. (2023). Pengaruh Variasi Arus Pengelasan Gas Metal Arc Welding (GMAW) terhadap Sifat Mekanis pada Pipa Seamless. Journal Mechanical Engineering (JME), 1(3), 158–158.
Jeklin, A. (2022). Sistem pengereman Tromol & cakram. Sistem Pengereman Tromol & Cakram, July, 1–23.
Nurfauzi, Y., Sokibi, P., & Hatta, M. (2024). KENDARAAN MENGGUNAKAN METODE WEB ENGINEER ( STUDI KASUS : NUNG KEY IMMOBILIZER ). 8(6), 12655–12663.
Okpatrioka. (2023). Okpatrioka STKIP Arrahmaniyah. DHARMA ACARIYA NUSANTARA : Jurnal Pendidikan, Bahasa Dan Budaya, 1(1), 86–100.
Pratama, R. B. (2023). Rancang Bangun Sistem Pengereman Prototype Mobil Listrik. 7, 1099–1106.
Robi Rojaya Simbolon, Farrel Pasya Harramain, & Mochamad Rizaldi Putra Sonjaya. (2024). Pentingnya Penerapan Keselamatan Dan Kesehatan Kerja (K3) Sebagai Faktor Penentu Optimalisasi Produktivitas Kerja. Pajak Dan Manajemen Keuangan, 1(3), 17–31. https://doi.org/10.61132/pajamkeu.v1i3.122
Saputro, F. I., & Pranoto, H. (2025). Analisis daya pengereman pada rem cakram roda depan kendaraan motor listrik e-niaga. 1(2), 82–93.
Sugiyono. (2020). Metodologi Penelitian Kuantitatif, Kualitatif dan R & D.
Suryana, T., Maulana, A., & Sebayang, S. (2025). Rancang Bangun dan Analisis Sistem Pengereman pada Mobil Listrik Prototipe UNPAM. 2686–5157.
Waruwu, M., Pu`at, S. N., Utami, P. R., Yanti, E., & Rusydiana, M. (2025). Metode Penelitian Kuantitatif: Konsep, Jenis, Tahapan dan Kelebihan. Jurnal Ilmiah Profesi Pendidikan, 10(1), 917–932. https://doi.org/10.29303/jipp.v10i1.3057
Wungo, G. L. (2020). Autocad & Sketchup Panduan Praktis untuk Urban Designer.
